Self Supply Application - Customer

Before starting, make sure you know whether this application is for a new embedded generation system or a modification to an existing embedded generation system. You’ll be asked to provide details about your embedded generation system and installer so we can assess your connection requirements. Some embedded generation systems may need to meet specific technical standards or have export limits applied. If you’re unsure, check with your installer before proceeding.

Please provide your details below.

Enter the Eglinton Village Energy (Eve) Account Number linked to the property where the system will be installed. This helps us identify the correct connection point. You can find your Eve Account Number on the front page of your bill, in the top right corner. Note: If your Retailer is not Eve, please contact your Retailer direct to initiate this process.

Provide the installation address for the system. Make sure this matches the supply address registered with your electricity provider. Note: Your Supply Address can be found on the front page of one of your bills

Enter the name of the company responsible for installing the system. This should match the business registered for the installation.

Provide the installer’s email address so we can send important updates and reference details if required.

Enter a contact number for the installer in case additional information or clarification is needed.

Specify the total inverter capacity of the system in kVA. This determines how much power the system can convert for use or export. Note: Speak with your Installer before providing this information. Note: The maximum inverter capacity at Eglinton Village is 10kVA.

Enter the total generation capacity of the solar panels in kW. Only include this if solar PV is part of the system. Note: Speak with your Installer before providing this information.

Provide the usable storage capacity of the battery system in kWh. Only required if a battery is being installed. Note: Speak with your Installer before providing this information.

By submitting this application, I acknowledge and agree that:

*The information I have provided is true, accurate and complete to the best of my knowledge at the time of submission.

*I am the account holder or an authorised representative for the nominated property.

*I have nominated the installer listed in this application and authorise them to act on my behalf to provide additional information and progress this application where required.

*I understand that my installer may be required to supply further technical details and documentation to support this application.

*I have read and accept the applicable Terms and Conditions provided above.

I also acknowledge that:

*My system must comply with all relevant technical and connection requirements, including any applicable standards for system size, export limits, and remote management capabilities.

*Depending on the system configuration, export limitations or control requirements (such as emergency management or network control) may be applied.

*Failure to meet these requirements may impact the ability to connect, operate, or receive benefits from the system.

I understand that:

*Additional works (such as meter reconfiguration or upgrades) may be required to enable connection and may incur costs and/or temporary interruptions to supply. Should this be applicable, you will be notified.

*This application is subject to assessment and approval, and further information may be requested.